T02 - Loading lance for tank trucks and tank wagons

Special design

T02 with evacuating dome

The loading lance is designed for application in piggable filling plants. It is mounted at the end of a loading arm and allows pipeline pigging through the complete loading arm. The pig can transport the product into the loading lance or back into the initial source tank.

The loading lance is equipped with a level control switch. Thus the product is transported back to the tank after loading and overfilling of trucks or wagons etc. is avoided. Due to the fact that the loading arm is fully piggable, it is possible to fill several different products through the same loading arm. Product flow is controlled by a sliding sleeve installed in the loading lance. This sleeve is operated by instrument air (positions open/closed/throttle). In case of emergency air failure, the loading lance is closed automatically by spring.

Indispensable for the use of the loading lance is the piggable loading arm T91.

Nominal inside diameters DN 80 - DN 100 (3" - 4")
Flanges meet DIN or ANSI standards
Pressure up to PN 16, 150 lb.
Temperature up to + 90°C, higher temperatures on request
Material steel or stainless steel body
Seal NBR, FKM, PTFE
Pneumatic cylinder for 3 or 6 bar of instrument air, with position indicator and spring return

Do you already make the best out of your pipes?

If you are interested in a non-binding quotation, and would like further information about the benefits of this kind of product, please do not hesitate to contact us. We will be pleased to send you more detailed information, or to give you advice at a more personel level.